Multi Function Metal Processing Machine
Enclosed Type
Laser cutting machine laser light path level adjustment method
by：Transon
2020-10-29
The laser cutting machine laser light path
1 level adjustment method. Adjust the adjustment screw on either side of the chassis, the laser in the middle of the chassis.
2. With frame type or a type level inside the laser plate, adjust slightly at the beginning of laser level;
3. Adjust the laser the screws on the legs, laser may be jacked up a certain height, then to add gaskets, only when the light path adjustment right, locking laser again.
4. Half fine adjustment ( The following for online after the normal operation of the machine tool)
5. First inside the reflecting mirror seat in a dimmer with spider silk, and observe laser out of shape and the location of the red light beam to the fork after the silk, to accurately adjust the laser several times, until the red light in the center of the spider silk.
6. Adjust the laser power output from around 50 w and 100 w, to fix a piece of cardboard on the spider silk, let the laser burn out in scraps of paper burn mark and observe laser injection after the shape and position of the fork silk, if there are any deviation will be expected to adjust repeatedly, until four o 'clock can burn mark symmetry.
1 level adjustment method. Adjust the adjustment screw on either side of the chassis, the laser in the middle of the chassis.
2. With frame type or a type level inside the laser plate, adjust slightly at the beginning of laser level;
3. Adjust the laser the screws on the legs, laser may be jacked up a certain height, then to add gaskets, only when the light path adjustment right, locking laser again.
4. Half fine adjustment ( The following for online after the normal operation of the machine tool)
5. First inside the reflecting mirror seat in a dimmer with spider silk, and observe laser out of shape and the location of the red light beam to the fork after the silk, to accurately adjust the laser several times, until the red light in the center of the spider silk.
6. Adjust the laser power output from around 50 w and 100 w, to fix a piece of cardboard on the spider silk, let the laser burn out in scraps of paper burn mark and observe laser injection after the shape and position of the fork silk, if there are any deviation will be expected to adjust repeatedly, until four o 'clock can burn mark symmetry.
Custom message
Related Products
