Enclosed Type

Laser cutting machine laser light light path migration solutions

by：Transon 2020-10-28

Laser cutting machine laser light modulator after long-term operation of the optical path will offset the solution: laser cutting machine laser light after a long-term operation of the friction and the long light path is offset. Would then take back the light path set, or it will produce material don't wear, cutting or cutting result is bad, because most of the laser cutting machine itself is a use of light path of flight system. Only the laser tube, reflection frames ( A, B, C) And focus lens and the corresponding adjusting device of the perfect cooperation is able to achieve good results, work out a good product, this is the core part of the use of laser cutting machine. Adjust the laser power output from around 50 w and 100 w, will be a cardboard fixed on the spider silk, let the laser burn out in scraps of paper burn mark and observe laser injection shape and the location of the fork after silk. Burn marks symmetry can be adjusted repeatedly until at four o 'clock.

Custom message