Laser cutting machine in the application of remote sensing structure light machine manufacturing

Laser cutting machine in the application of remote sensing structure light machine manufacturing: ( 1) And laser cutting can be applied to mechanical and optical remote sensor structure of blanking, machining process, such as shape, can be to improve the production efficiency by 3 ~ 5 times. ( 2) Preforming, using laser rapid prototyping technology, structure can greatly reduce the processing cycle. Many highly lightweight remote sensor support structures, such as hollow shafting, large metal load-carrying cylinder components, off-axis remote sensor of large titanium alloy substrate such as installation, all have the potential to adopt the technology. ( 3) General wall thickness, laser cutting machine remote sensor mechanical structure, require small welding process of solder joints, welding, welding heat affected zone around the small, especially suitable for using laser welding. Remote sensor that is commonly used in titanium alloy with a strong tendency of grain growth at high temperature, the traditional welding method, welding heat affected zone is large, weld internal grain coarsening. Therefore, high energy density, low heat input of laser welding is a remote sensing device the first selection of high strength titanium alloy welded components. ( 4. ) Remote sensor parts adopt highly lightweight structure form, in the process of machining hard to avoid can appear some mistakes, laser cutting machine to existing processing method often choose the semi-finished parts or nearly eventually scrap processing, seriously affect the product development progress. The laser forming repair technology can overcome many problems in traditional repair technology, good organization and performance, make remote sensor complicated structure repair possible. ( 5) , laser cutting machine remote sensor in the moving parts often use the metal as the shaft material such as titanium alloy, the use of laser surface modification technology can make the component surface nitriding or compounds of matrix composite membrane, can greatly improve the service life of the sensor moving parts.