Enclosed Type

Laser cutting machine cutting head out feet adjustment method

by：Transon 2020-10-28

The effect of laser cutting machine cutting head leaned feet, it is used to track the change of the focal point of random, and keep the focus position of constant. Of constant focus position is one of the important factors affect the cutting quality. Its adjustment method is described below. First, the first will be the focus of the machines on the operation panel of fine-tuning knob to the middle. Second, insert the sensor lock piece, output, using the multimeter, measure instrument for the fundamental voltage is zero, then spin lock tight pieces of the screw. Third, adjust the speed adjustment screw, measured at the same time, the voltage is about 3 ~ 6 v or so, the bigger the voltage, the faster the servo, then lock adjusting screw. Fourth, regular check, whether the positive and negative tight set screw preload line pressing nut is loose, and determine the positive and negative direction ( Two to not interchangeable) 。 Fifth, security protection encountered unexpected happens, the rod breaking, machine tool automatically stops

Custom message