How to prolong the service life of graphite engraving machine?

A, graphite engraving machine maintenance method: 1, time of hydraulic system for oil quality testing, and add and replace hydraulic oil. Regularly clean or replace graphite machine filters of various kinds of lubrication, hydraulic and pneumatic systems; Regular inspection and correction the level of the machine tool and mechanical accuracy. Discharge gas pressure system of water filter on a regular basis. 2, graphite machining high precision carving and comprehensive processing ability is strong, and operating correctly, can improve the service life of the product, also can prolong the service life of the product, use graphite engraving machine use should be paid attention to the environment, to avoid direct sunlight and heat radiation, avoid too wet, too much dust or corrosive gas, and away from the vibration equipment. 3, graphite engraving machine cannot be shut down for a long time, there is no processing task will run on a regular basis, or three times every Tuesday, running an hour at a time, to reduce the humidity in the machine with calorific value, make the electronic components be affected with damp be affected with damp, not found any low battery alarm in time, prevent the loss of the system parameter setting. Second, graphite engraving machine precision correction methods: 1, soft compensation method is mainly through the system parameters, such as screw backlash compensation, machine tool return reference point position correction, etc. ; 2, hard method usually in the overhaul of the machine tool, such as guide rail repair, ball screw nut pair, adjust the reverse clearance, etc.