Fiber laser marking machine with auto feeding materials function
Enclosed Type
Two important aspects of maintenance to be careful
by：Transon
2020-10-31
Now cutting machine is widely applied in industry, the cutting machine maintenance is also very seriously, but in the process of maintenance is not very good, there are always some places do cutting machine manufacturer below small make up two important aspects of the cutting machine, how to protect their own factories cutting machine: 1, filter (
1)
Every time an oil change, filter should be replaced or cleaned thoroughly;
（
2)
Associated with the machine alarm or clean oil filter and other abnormal, should be replaced;
（
3)
Tank on the air filter, clean every three months to check, good 1 year replacement.
2, laser oil (
1)
Weekly check the tank oil level, such as laser system should also check after repair, oil level is lower than the oil window should include laser oil;
（
2)
This machine is used for laser for ISO HM46 or MOBIL oil DTE25;
（
3)
New work 2000 hours after the oil should be replaced, later every work of 4000 ~ 6000 hours after the oil should be replaced, the oil change every time, should be cleaning tank;
（
4)
System oil temperature should be between 35 ℃ ~ 60 ℃, shall not exceed 70 ℃, such as too high will lead to damage of metamorphic oil and accessories.
Custom message
Related Products
