Enclosed Type

The winter maintenance knowledge of engraving machine

by：Transon 2020-08-20

Jinan winter stop-go, didn't go suddenly let a person feel the autumn, and has to stay, let a person feel winter bleak cold alternately. In such a season, jinan engraving machine alert old and new users of stone carving machine maintenance in winter! Stone carving machine its unique water cooling system, in the stone carving machine performance was optimized at the same time, also condemned the limitations of itself. Temperature is 0 - generally suitable for carving Between 45 degrees below zero degrees Celsius, freezing, used in cooling water will occur is bound to affect the use of engraving machine. Besides, stone carving machine using the relative humidity in the range of 30% 75%, too dry and humid conditions are unfavorable to carving machine control and power system optimal. Winter relatively dry environment is unfavorable to the normal use of engraving machine. Engraving machine should be paid attention to so, winter, warm, today in the aqueduct water to keep clear of in time, avoid the freeze effect after water cycle; Pump will be timely from take a tank or remove the bucket of water, so as to avoid freezing in it; Next, want to notice the dry humidity of factory keep, too dry, can increase the number of mop the floor, keep the plant suitable humidity. Suggested that winter, machines do not put in outdoor, it is best to machine to the factory.

Custom message