The use of CNC engraving machine

With the improvement of industrial mechanization, CNC engraving machine utilization rate has been increased. But do you know how to use for this kind of equipment? Although its using method is not very complex, but the key point of some operating matters still need to be aware of. About the use of the CNC engraving machine: 1, the need of engraving path programming, needed to determine the workpieces in all kinds of parameters, path generation, will be words or generate color line model. 2, the carving path for input, and at the same time in need input control software, general engraving machine control system of the input format for nc program, MMG, if the format is not supported, so need to transform. 3, check the carving machine whether there is sundry, such as debris, powder and so on, if there is sundry, you need to clean up, or it will affect the workpiece processing integrity. 4, for the knife, to determine the good machining, the coordinates of the origin of the equipment of each axis to be aligned with the original point, reset the data. 5, check some water loop is normal in the machining process, look at the equipment adjusting speed is reasonable. 6, start the engraving machine, carry on the processing, the processing is completed, look at the effect how, if satisfied, then the engraving machine carving work is completed. The use of the CNC engraving machine is very simple? Might as well try it yourself.