Enclosed Type

The solution to the common problems in laser cutting machine

by：Transon 2020-10-29

Laser cutting machine solution to a common question is as follows: 1, the machine doesn't work ( Without refrigeration or pump function) 。 Check whether the power cord is connected to the power plug; Check whether the power switch is open; Check whether the panel power supply is open. 2, the pump can't work normally. Check the liquid level of the whole system, ensure the pump in liquid receiver; Check whether the motor pump running, Check whether the circulatory system congestion; 3, lack of pump suction. Check whether the voltage is too low; Check whether the pipe diameter is too small. Check whether the fluid viscosity is too high; Check whether the connecting tube is limited. 4, no refrigeration or lack of refrigeration. Check whether the voltage is too low or too high; Check whether there is ventilated place congestion; Check the ambient temperature ( High temperature can cause compressor short outage) ; Check if too much heat is transferred to the cooling liquid, because it can more than refrigeration system cooling capacity.

Custom message