Enclosed Type

The correct way of using the laser cutting machine

by：Transon 2020-10-29

Laser cutting machine according to the actual situation of work piece choose open or close the machining, under the condition of avoiding interference as far as possible to shorten the interval of nozzle and artifacts. 。 Check wire electrode proper feeding speed. When cutting taper tension should be down to the usual half. The process of laser cutting machine, want to often inspection on cutting condition monitoring, found the questions immediately. When programming according to the actual situation to determine accurate processing technology and processing route, prevent due to insufficient processing position or on intensity artifacts caused by insufficient scrap or block fell ahead of schedule. When laser cutting machine cut should watch to judge the processing not disorderly, found that bad when adjust. Check whether the wire electrode tension is enough. Wire cutting before must confirm procedure and the amount of compensation is accurate. Moving workbench or spindle, according to the distance interval and artifacts, selected movement speed, accurate collision is wary of moving too fast. Check the jets to choose whether or not reasonable, rough machining with high pressure jet, finishing with low pressure jet. The process, the interval of nozzles and artifacts usually take 0. 05 ~ 0. 1mm。

Custom message