Enclosed Type

Laser cutting machine maintenance regularly

by：Transon 2020-11-01

Laser cutting machine is in use process will often encounter some problems, these problems, in large part to the working efficiency of the laser cutting machine fell dramatically, so we have to do to the regular maintenance of the state: 1. Condenser cooling, ventilation and filter also maintain system ability good state, so the condenser, ventilation, screen pack three parts must be also want to work in the case of in addition to the dust. Filter is easily from both sides to be taken, use gentle cleanser and water to remove dust accumulation of ash and dry rinse again. 2. Pure water filter which is regularly across filter for rinse or a replacement. 3. Fluid surface regularly check if don't need to add liquid, the water in the tank is generally need to cover coil of the tank, when the amount of water below the coil is liquid need to be home. The water quality is also very important, it's necessary to change the water regularly, if it is a small flow pump, this is because the pump MenDu air in the pump body, can press the red color in the water filter press button to discharge water system, air until the water flow is normal after can be stopped. We want to know the water in the bubbles will reduce water pervious to light quality, transparent hose have blisters or tank have spirit bubble back to the nozzle, check whether have the phenomenon of leakage, water tank water level is low, timely find out the problems to solve.

Custom message