Enclosed Type

Laser cutting machine light path adjustment

by：Transon 2020-10-28

Laser cutting machine, the adjustment of the light path 1, first of all, laser power transferred to around ten percent, and then turn off the laser on, and then to dimmer. 2, the adjustment of the first light: use transparent adhesive tape on the reflective body some first, confirm whether the light in the middle of the mirror, and then adjusted by the adjustment screw three rotation on the mirror, light in the center of the lens barrel, put laser mouth to go up and then some, whether in the center of the laser's mouth. Vertical correction laser: laser power transferred to the first forty percent, organic board to confirm the upper and lower two light is vertical, if after vertical light. If on the organic board, light Angle adjustable laser tube before and after high and low, inclined adjustable laser tube bracket swinging around. Light: the laser focal length for confirmation from top to bottom, first on the right of the laser head and the front of the screw loose. Use iron plate cutting field type, for tool setting seam width, vertical degree of iron plate

Custom message