Enclosed Type

Laser cutting machine lens and the guide rail cleaning method

by：Transon 2020-10-30

Engraving machine with three pieces of reflector with 1 piece of focusing mirror ( 1 reflector in the laser tube, the launch of the exit is at the upper left of the machine, the mirror is in the left side of the beam of # 2 and # 3 mirrors in laser head on top of the fixed part, is located in the lower part of the laser focusing mirror adjustable) in the tube, Through which the laser is emitted from the laser head after lens reflex, focus. Lenses can easily touch dirt or other contaminants, cause loss or damage of lens of laser, no. 1 and no. 2 don't must be removed, while the lens cleaning need to dip in a cleaning fluid to clean lens paper carefully wipe up along one edge of the lens central to rotary. No. 3, lens and focus lens from the frame, in the same way to wipe, wipe after the completion of the same back then.

Custom message