Laser cutting machine auxiliary gas pressure on the result of cutting

In the process of laser cutting machine work, auxiliary gas pressure have great influence on the results of cutting. Auxiliary gas must have enough pressure to be able to completely clear the laser cutting of waste residue, general when cutting thick workpiece pressure to reduce a little, stick to the workpiece on the residue will damage the cutting edge. Increase the gas pressure can be laser cutting speed ahead, but after reaching a big value, continue to increase the gas pressure will cause the cutting speed. With aid of the high gas pressure, the reason of lower cutting speed in addition to boil down to the high air velocity on and hang a district enhanced cooling effect, also may be intermittent shock waves that exist in the air of district cooling the action of the laser interference. Exists in the airflow uneven pressure and temperature, can cause the change of airflow field density. Such a density gradient caused internal refractive index change to dry properly focused beam energy, focus or beam divergence. This kind of interference may affect the melting efficiency, sometimes may change the model structure, led to the decrease of the quality of the cutting, if the beam divergence too hard. Make the light is too large, and even can't effectively cut the serious consequences. In order to avoid the high-speed airflow adverse reactions on the properties of laser cutting, can imagine change the distribution of total pressure in the air, because the air pressure distribution of the change, make the melting process occurs in the central depression area; While the surrounding adjacent high can raise enough momentum ( Momentum) To ensure more effectively remove slag. Due to the intermittent high speed of light will not cause interference, melting efficiency is also improved.