Direct factors affecting the quality of laser cutting machine

Direct factors affecting the quality of laser cutting machine, the thickness of the material - 1 Directly affect the quality of the cutting machine laser cutting is suitable for cutting thin plate, the 12 mm carbon steel and stainless steel under 6 mm below the cutting effect is obvious, good quality, but also can ensure the efficiency. For example, in the thickness of the material & lt; 1 mm, material incision is very smooth. 2, laser output power and mode - Directly affect the quality of the cutting machine of the laser power output is higher, the quality of the cutting on the same thickness of the plate cutting, the better the results. Laser cutting pattern and the higher the fit of the material, cutting, the better the quality of the 3, the surface roughness Directly affect the quality of the cutting machine in general, the material surface is smooth, the better cutting quality. Wuhan day qi laser through independent research and development, with automatic induction system, can be adjusted automatically according to the different thickness of the material the height of the cutting head. 4, - focus position Directly affect the quality of the cutting machine is very simple, the focus of the laser cutting of good, cutting precision and accuracy can meet the requirements. 5, cutting speed Directly affect the quality of the cutting machine, no matter what kind of laser cutting materials if you can make the cutting speed and alignment to achieve good material, so the cutting effect is good, too fast and too slow will affect the effect of laser cutting. 6, assist gas pressure and species - Directly affect the quality of the cutting machine pressure is higher, the higher the purity of the gas, the dregs of the adhesive material is less, the smooth cut. Different type of gas, and the effect of different cutting speed. Generally speaking, oxygen cutting speed, nitrogen gas cutting effect is good, the air of cutting cost is low.