Mini Raycus 20W Rotary Axis Fiber Laser Metal Engraver Fiber Laser Marking Machine for Ring Bracelet Mugs
Enclosed Type
The small processing center in the broken sword is produced by what reason?
by：Transon
2020-04-28
Compared to common machine tool, the small machining center is that it can achieve the advantages of automatic tool change, complete artifacts of a variety of process operation.
For is automatic tool change CNC system under various interference influence unavoidable problems, so sometimes may encounter small machining center tool change failure.
The small processing center in the broken sword is produced by what reason?
Let's say the main points.
1.
Manipulator is not back to the origin.
No collected manipulator origin signal or system.
2.
Knife set of turning cylinder gas path fault, such as: insufficient pressure, gas circuit impassability, etc.
3.
Sheath flip cylinder solenoid valve failure, not the knife set return action.
4.
Knife sets of machinery fault for the flip, such as: knife sets of flip rod fracture, flip agencies other parts damaged, knife sets of jam, etc.
If you need the manual guide bush turned to change knife, then look at the following aspects.
1.
Whether checked manually pine nipped dao if there is a problem;
2.
Check that the tool storage circuit and gas path is normal;
3.
Air pressure is normal. 4.
Single instruction, please make the knife set up and down, to see whether normal;
From the above several aspects to find the reason, and then according to each part to change the basic maintenance methods can solve the problem of small machining center tool change failure.
Custom message
Related Products
