4060 Mini CNC Router For Aluminum PVC PCB, Small Wood CNC Router 4 axis cnc router
Enclosed Type
Ningbo stone carving machine need maintenance and maintenance
by：Transon
2020-07-20
Ningbo stone carving machine need maintenance and maintenance: 1, 10 hours a day under the continuous running time, guarantee the normal work of the cooling water clean and the water pump, must not water shortage phenomenon in a spindle motor, regular replacement of cooling water, in order to prevent the water temperature is too high.
If working environment temperature is too low in winter can replace the water inside cistern with antifreeze.
2, each machine after use, should pay attention to clean up, be sure to clean up the dust on the platform and the transmission system, on a regular basis (
A week)
The drive system (
Three axis X, Y, Z)
Lubricating oil.
(
Note: X, Y, Z three axis polished rod with oil for maintenance;
Add the butter screw rod part;
If working environment temperature is too low in winter screw, polished rod (
Square guide or circular guide)
First part should use gasoline to wash clean, then add oil, otherwise it will cause machine transmission part of the resistance is too large and cause dislocation.
)
3, to electrical maintenance checks, must cut off power supply, to monitor display and main circuit power supply after lights out, may.
Custom message
Related Products
