3W 5W Portable UV Laser Marking/engraving Machine/equipment Price
Enclosed Type
Laser cutting machine cutting equipment why not reset properly
by：Transon
2020-10-30
Laser cutting machine equipment in use may be reset is not normal, so how to deal with?
Which is first of all we need to check the location problems caused by this kind of situation, the following look likely to lead to reset abnormal aspects:
1. Check whether the sensor is stained with grey, poor contact or damaged ( Wipe the dust on the sensor or replace) ；
2. Check whether flexible conducting wires (poor contact or damage to the Clip cable to insert or replace the cable pull) ；
3. Check whether the ground contact is reliable or whether the high tension line damaged ( Back ground or replace the high tension line) ；
4. Laser cutting machine motor line contact undesirable.
here is the method of processing:
the clepsydra of laser cutting machine, the initialization is not correct, has been to send data, operation order, electrostatic interference, cleaning the hook edge dislocation, not closed, parameter Settings are correct, check software; About the computer system is wrong, check belt release are consistent or backend belt is too loose, check belt or synchronous wheel skid, skip, check whether the beam is parallel.
1. Check whether the sensor is stained with grey, poor contact or damaged ( Wipe the dust on the sensor or replace) ；
2. Check whether flexible conducting wires (poor contact or damage to the Clip cable to insert or replace the cable pull) ；
3. Check whether the ground contact is reliable or whether the high tension line damaged ( Back ground or replace the high tension line) ；
4. Laser cutting machine motor line contact undesirable.
here is the method of processing:
the clepsydra of laser cutting machine, the initialization is not correct, has been to send data, operation order, electrostatic interference, cleaning the hook edge dislocation, not closed, parameter Settings are correct, check software; About the computer system is wrong, check belt release are consistent or backend belt is too loose, check belt or synchronous wheel skid, skip, check whether the beam is parallel.
Custom message
Related Products
