Jiangsu sharp cutting machine manufacturers, to teach you how to choose and buy cutting machine

A lot of consumer is buying all don't know how to choose the cutting machine cutting machine, here we introduce how to choose and buy cutting machine! Is the first to consider important matters you want to produce the parts, the point is to buy a short and able to complete processing of workbench, small tonnage of the machine. Carefully consider material brand and big thickness and length of processing. If big department is the thickness of the 16 the gauge, length of 10 feet of low carbon steel, so free bending force not greater than 50 tons. Nothing more than, if engaged in a lot of a bottom die forming, maybe a 150 tonnage of the machine tool should be considered. Assume that material is 1/4 inch thick, 10 feet free bending need 165 tons, and a bottom die bending need at least 600 tons. If big department of workpiece is five feet or more short, tonnage half bad matter, bending machine so as to greatly reduce the purchase of capital. Nao: would you consider this machine may be scratched. Under the same load, 10 feet machine workbench and the slider of torsion is 5 feet machine 4 times. That is, the shorter the machine requires less shim adjustment, will be able to produce qualified parts. Reduce the gasket adjustment and shorten the preparation time. The material brand is also a pivotal factor. With low carbon steel, stainless steel need to load usually increased by about 50%, while most of the brand of soft aluminum reduced about 50%. You can get from cutting machine manufacturers machine ton meter, the table shows that under different thickness, different material per foot length required tonnage estimates.










pneumatic cutter relatively high external dependency.