Enclosed Type

Laser cutting machine regulated power supply maintenance

by：Transon 2020-10-28

Laser cutting machine is a laser beam to the surface to the energy released when the workpiece melting and evaporation, to achieve the purpose of cutting, with high accuracy, fast cutting. People often use the clear, when the laser light is not stable, cause there may be many, which is likely to be caused by unstable power supply. In the course of everyday use, check the voltage stabilizer work status, to prevent the occurrence of failure. Regulated power supply to check for laser cutting machine, mainly to check the transformer, the transformer temperature rise is normal, overheating, the phenomenon such as coil change color. Carbon brushes to keep good contact, monitor the input and output voltage is normal, with or without overload phenomenon, etc. To conduct a more strict maintenance, every three months to remove stabilizer components of dust and dirt, check whether the chain transmission system work normally, for sprocket, adjust tightness of the chain, to check whether there is tilted carbon brush holder, stuck phenomenon, if found should be adjusted. In addition, also check electrical contact ever damage phenomenon, if any should be timely replacement or repair; Check whether the column type regulating transformer is nimble, carbon brush is in good condition, timely replacement of damaged or large amount of wear of carbon brush, or burn of coil contact surface carbon brush powder, application of 0 fine burning on grinding flat and eliminate dust in a timely manner.

Custom message