Enclosed Type

Laser cutting machine cutting burrs how to solve

by：Transon 2020-10-31

Laser cutting machine cutting low carbon steel in burr: the main reasons for fluctuation of laser focus position is not correct, you need to do to focus location test, according to the offset of focus adjustment; The laser output power is not enough, need to check whether the laser generator working normally, if the normal, is to observe the laser control button on the output value is correct, try to adjust; Cutting speed too slow, need to increase the linear velocity when operating control; Cutting gas purity is not enough, need to provide the high quality of cutting gas; Laser focus shifts, focus location test is needed to make adjustment according to the offset of focus, Machine tool operation instability time is too long, need to shutdown restart at this time. Laser cutting machine for cutting stainless steel or coated aluminium zinc plate burrs how to solve, not simply to speed up the cutting speed, because of the increased speed sometimes plate cutting wear, the situation especially when processing coated aluminium zinc plate. At this time should be resolved to comprehensively consider the other factors of machine tools, such as whether to replace the nozzle, guide rail movement is not stable, etc.

Custom message