CNC Plasma Cutting Machine Plasma Cutter Plasma Cut CNC
Enclosed Type
Laser cutting machine light path adjustment does not reach the designated position
by：Transon
2020-10-29
The cause of the laser cutting machine light path adjustment does not reach the designated position
1. The lens is loose. Light through the lens reflex, if the lens problems, which, its light path may also does not reach the designated position, therefore, to check the reflective lenses I don't have to lock, if it is a loose, which, the machine is running, it will also with the vibration of the lenses, optical path will be deviation, which yao, light is not consistent.
2。 The gear in question. Machine at run time, if you have any sundry, gear with which, the machine at the time of transmission, the belt is jumping gears, which, with laser beam it will skip the reason, it is swinging, which yao, calibration of the light path, every time it is not the same origin of the above, it is also less than light.
1. The lens is loose. Light through the lens reflex, if the lens problems, which, its light path may also does not reach the designated position, therefore, to check the reflective lenses I don't have to lock, if it is a loose, which, the machine is running, it will also with the vibration of the lenses, optical path will be deviation, which yao, light is not consistent.
2。 The gear in question. Machine at run time, if you have any sundry, gear with which, the machine at the time of transmission, the belt is jumping gears, which, with laser beam it will skip the reason, it is swinging, which yao, calibration of the light path, every time it is not the same origin of the above, it is also less than light.
Custom message
Related Products
