Transon TSW9015 ATC CNC Router wood carving cutting machine woodworking machinery with rotary
Laser cutting machine is the key to the light
by：Transon
2020-10-28
Laser cutting machine is the key to the optical processing: 1.
Check the water tank is warning alarm, use water tank inlet and outlet of a pipeline to connect, the water in the cistern electricity, and see if it is the police, if the alarm means tank problems, if you don't call the police, means that the laser tube waterway, check the water pipe is blocked or bending, or a water is sundry.
Do not call the police, check if the power supply fan rotation, laser power supply fan is in turn, can use the sub laser power supply 2 or 3 feet, whether the laser tube, luminous means control card on-line appeared loose or damage of movement control CARDS.
No light, laser power supply need to be replaced in a timely manner, in general damage of laser tube is very few, the laser tube high pressure side, if appear lighter phenomenon, this phenomenon will burn out electronic components and boards.
Laser power supply fan does not turn, you can use the pencil test on both ends of the laser power is there, a little means that the power supply is damaged, no electricity, to continue to check the laser power switch.
2.
Couldn't switch on the light, the operator is not very familiar with the operation process of the machine.
To check whether the following respects power laser cutting machine can open.
The water tank is on.
Laser cutting machine operation panel, power is correct.
Or computer software parameters are correct.
The light path is normal.
(
According to the light to see whether the laser tube light, light and laser light, there is something wrong with the light path)
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products
