The regular maintenance of laser cutting machine

With the development of economy, people have developed laser cutting machine. Laser cutting machine is a modern high-tech products, widely used in all walks of life, most companies are the use of laser cutting machine is used for a short period of time, so the laser cutting machine itself is not a good thing, as long as the machine works to play its role. We are in the process of using regularly for laser cutting machine for some maintenance work, maintenance, so as to make good use laser cutting will keep good performance. In the process of using easy to appear some problems, it will reduce the working efficiency of the laser cutting machine, so we're going to the laser cutting machine to do maintenance on a regular basis.
1, condenser, good ventilation, screen pack
keep system status, then we must to the condenser, ventilation and filter also three parts must work for dust removal. Take down the cutting machine filter from either side, use a certain amount of cleanser and water to remove dust filter, wash again, and then to dry.
2, pure water filter
we should time for pure water filter for filter for cleaning or replacement.
3,
fluid surface in the process of using the laser cutting machine we need add water, should be inspected regularly in the cutting machine we need the water in the tank cover coil in the water tank, if the water is below the coil when we add water dosing. Cutting machine of the water quality is also very important, so we have to change the water in the cutting machine, regularly appear in the process of using water pump water to reduce, this is because there is an air lead to smaller water pump body, this time you need to press the red button on the water filter will discharge air water system, until the water flow is normal after can be stopped