Woodworking engraving machine can process what materials and common path what - carving - 【 】 _ _ _ woodworking engraving machine carved machine CNC engraving machine

woodworking engraving machine cutting of wood object is solid wood and wood composites.




solid wood and can be divided into soft materials, hard materials and modification of wood, etc. ;




wood composite materials including LVL, plywood, particle board, directional particieboard, large particle board, gypsum particleboard, cement particle board, medium density fiberboard (MDF), high density fiberboard, hardboard, joinery board, glued timber, etc.




some wood or wood composites workpiece pass one-sided or two-sided decorated processing.






woodworking engraving machine carved software path common sense:




1, intaglio, Yang carved


the so-called 'shade is engraved' means: after carving in the raw material is recessed words or patterns.


the so-called 'Yang carved' means: after carving in the raw material is out of words or patterns, also known as Yang Yang figure or word.





2, engraving depth

'carving depth' refers to the maximum depth of processing. In the three-dimensional sculpture, the depth of engraving path changing with the change of the shape of the machining graphics.




3, layered carving


in 2 d, 3 d, cutting word, image engraving 'layered carving', in each feed does not exceed [ ] Mm, 'said every time into the material of the maximum depth of cutting tool and a hard material according to the experience value for multiple layered carving, carving depth of the final design.




4, Mosaic path


the so-called 'Mosaic', is a graphic design, respectively after carved intaglio and Yang, the resulting two parts respectively referred to as female die and male die; Two mold can seamlessly navigate buckle together. Considering the influence of the cutting tool, when calculating the carving path, one must choose 'set path'.




5, the cutting tool compensation


in the process of machining, the tool is cutting width, coupled with 'tool compensation', can automatically eliminate the influence of cutter blade width the processing effect.




6, check the direction of rotation of the


in the end of cutting and milling, choosing the right hook edge direction of rotation, can make the processed object side is smooth.




7, milling bottom way


in the path of the 2 d and 3 d calculation, the bottom of the milling is a common way of processing, namely the object or milling to spare part of the text. Commonly used way of milling bottom are: horizontal milling bottom, the bottom of the vertical milling, forward 45 degrees of milling bottom, reverse milling bottom, the bottom of the circular milling 45 degrees, but no matter choose which kinds of means, the result is the same, different only processing tool when walking routes.




8, cutting tool selection


in the processing of objects of different materials, different hardness, in order to ensure the machining efficiency, guarantee the processing effect, need to choose the appropriate tool. Users can set, named after their commonly used tool.




woodworking engraving machine operation key points:




1, woodworking carving machine after carving location, must put X, Y, Z axis work-piece coordinate all classified as '0'.


2, adjusted the engraving speed and spindle motor speed, when the carving in case appear too fast, speed too slow and cutting knife.


3, automatic knife, pay attention to the knife block must be with engraving machine aluminum insulation mesa.


4, sculpture, not sure if the first knife or be afraid to make mistakes, can put the feed speed is slow, think carving normal speed back to normal again; It can also be simulated in idle sculpture, look to whether normal.


5, if not for a long time to use woodworking engraving machine, should be regularly go idle every week, it is best to every week, to ensure the flexibility of the transmission system. Nc tool


6, for woodworking engraving machine running for ten hours/day in a row the following; Guarantee the normal work of the cooling water clean and the water pump, must not water shortage phenomenon in a water-cooled spindle motor, regular replacement of cooling water, in order to prevent the water temperature is too high, circulating water as much as possible, can change the large capacity water tank.


7, after each use woodworking engraving machine, should pay attention to clean up, will have to clean up the dust on the platform and drive system; Regularly for the transmission system of X, Y and Z axis lubrication oil.


8, operating personnel in the best operating woodworking engraving machine to wear dust masks and goggles, such as in the process to avoid the dust produced in human body, causing discomfort.


9, woodworking engraving machine carved daily maintenance methods in woodworking machine and dust dust removal device, dust removal equipment supporting the use.