CNC cutting machine, the safety operation specification and maintenance skills

Compared to the traditional cutting machine, more high-tech modern CNC cutting machine, don't need too much in control and manipulation technology of artificial manipulation, so security is greatly improved, but also cannot ignore safety control aspects of the subject. Cutting machine use the condition of any large processing machinery products, all want to accord with a condition - — Strictly abide by rules of machine tool and work safely, according to the designated wearing protective equipment, so as to avoid due to accidental injury. That could spark nc cutter mould failure, service life, therefore to confront. Nc cutter mold how to manipulate and it is safe to use? Bending machine as a kind of metal processing machinery, often there is a danger, especially the wrong manipulation is likely to be associated with accidents, so strictly abide by the machine work ethic is necessary. In the formal process, should be reasonable arrangement of artificial to manipulate, often configuration three people: one person the same command, one person's manipulation, one feeding. In addition also moment of attention to cutting machine cutting machine work in all kinds of parts. Common security issues include the following aspects: sheet metal bending when necessary compaction, prevent the sheet metal cock hurt; Sheet metal molding process to block the power supply, resting operation to inherit; Under the change in the manufacturing process of variable modulus of say, do not allow to have any contact with the lower die; In the back of my machine tools in the process of the work is not promised to stand; It is forbidden to separate sheet metal at one end of the compressive and flexural strength; Found when running is CNC cutting machine mold piece or not, should be immediately parking correction. If the parts is firm and not random, if you have a loose, if discover subject to timely solve. The preparation before processing proposed raising elder line before actual use idle time, in order to better monitor the performance of the machine, is idle running 1 - usually adopted method 2 minutes, 2 - skateboard full stroke movement More than 3 times, pay attention to abnormal sound, when it is necessary to parking discharge failure. Often check the upper and lower mould of coincidence degree, through the pressure gauge instructions to identify; An exception occurs to immediately stop, after discharge to produce; Ban on bending super thick steel plate, iron plate and quenching far and advanced alloy steel, may cause the damage of the machine tool. Before using the check before start the CNC cutting machine mould must be seriously check the parts and the function switch, a few important locations, such as motor, switch, line and grounding. Processing pay attention to safety matters most in CNC cutting machine in the process of mould processing of security topic is very serious, bending machines, so we should pay attention to. Also, check the parameters of the mold itself, such as the contact ratio and sturdiness, installation is in accordance with the specification and so on.








pneumatic cutting machine intended to maintain protection during high temperature operation