Your reason for five axis machining center

Five axis machining center


high machining accuracy


five axis machining center processing precision can reach 0. 001 - 0. 1mm。 Five axis machining center is controlled by digital signal. For nc device output
each pulse signal, the machine moving parts with a pulse equivalent ( Usually to 0. 001mm） 。 In addition, the numerical control device can also reverse compensation into
material chain gap with the average error between the screw pitch. Therefore increased the five axis machining center. Center positioning accuracy is higher.


high productivity


five axis machining center can effectively shorten the processing time and auxiliary time of parts, five axis machining center spindle speed and feed rate are big
allow big strong cutting the amount of cutting machine tools. Five axis machining center rapid movement and positioning of the moving parts, high speed cutting, reduce the half turnaround time between
product process, improve the production efficiency.


the processing quality is stable, reliable,


processing with a batch of parts, on the same machine tool, in the same processing conditions, using the same tooling and processing technology, tool path is
with completely, good consistency and parts quality is stable.


highly flexible


five axis machining center processing parts mainly depends on the processing procedure. It is different from ordinary machine tools. Don't need, need to replace many tools and fixture,
don't need frequent adjustment of machine tool. As a result, five axis machining center is suitable for the occasion of frequent replacement parts. Is suitable for single piece and small batch raw
production and new product development, shorten the production preparation period, saving the cost of a large number of process equipment.



save labor

adjust after the first five axis machining center, input program starts, machine can automatically continuous processing, until the end of the processing. Main
operator is program input, editing, loading and unloading parts, tool preparation, processing and state observation, parts detection, etc. , greatly reduces the labor intensity, make the machine tool
operator work tend to be more intelligent. In addition, the machine tool is usually enclosed processing, clean and safe.