Woodworking engraving machine should be how to use the wood carving - - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

CNC machinery co. , LTD. , integrating research, development, manufacture various types of woodworking advertising engraving machine | jade stone carving machine | | metal mold engraving machine series of optical fiber laser five-axis robot | | styrofoam CNC mortise and tenon joint processing center production line | | customize household etc. Various kinds of CNC engraving machine series, just take a look at below small make up of woodworking engraving machine should be how to use the wood carving of related information, hope to be of service, welcome to inquire!





woodworking engraving machine



log: wood is by far the most commonly used laser machining material, engraving, cutting, assembly easily. Some wooden easy gasification, cherry, maple, etc by laser vaporization, which is suitable for sculpture. Each wood has its own characteristics, some close some raw materials, the greater the density, the more hard, while carving or cutting with laser power. We recommend not familiar carving wood, carved features to study first.







2, wood carving; On the wood carving, in general, is usually a Yin carving, engraving depth is deeper. Such power generally set high, if encounter a hard wood may make after carving graphics color becomes darker. If you want to make the color shallow some, can increase the speed of engraving, tried to carve a few times more. In some wood carving will produce some lampblack is attached to the surface of wood, if the wood has brush paint can it carefully wipe wet cloth, if you do not go up lacquer might not clean, cause product surface soiled.







3, plywood: actually, and on the wood engraving on the plywood not big difference, is only one thing to note, the engraving depth is too deep. After cutting edge will be as black as wood plywood, key if the plywood is used that made of wood.







4, color: after wood carving tend to have a feeling that is burning, wood with a match with the original artistic beauty, its color shades basically see the laser power and speed of engraving. But some of the wood is usually soft texture of that kind of, no matter what you can't change the color ( Such as birch) 。 Coloring of finished product, can use propylene paint.







5, wood cutting, the depth of the laser engraving machine cutting wood is generally not deep, maximum cutting depth depends on wooden materials and laser power, if you want to cut thick lumber, can cut a little slower, but may cause burning of wood. Specific operations can try to use large size lenses, and adopt the method of repeated cutting.