Jinan Transon CNC Equipment Co., Ltd.
S I N C E 2 0 1 0
Latest products
Woodworking engraving machine four questions common processing method
by：Transon
2020-11-01
Woodworking engraving machine in the process of the day-to-day work hard to avoid can appear some problems, some reason is that the configuration of the machine itself, some reason is caused by customer wrong operation, the following nc company did some finishing on some common problems and for your reference:
a: woodworking engraving machine work spindle motor in the process of sudden halt or slow.
:
1, the working voltage instability or super load, add a voltage regulator.
2, check whether the median line is connected and the thread if there were any desoldering.
engraving machine adopts advanced assembly process automation, every factory of the machine after 72 hours of high strength quality inspection and testing, to ensure the machine zero fault, at the same time, professional and timely after-sales service team is also the first time to help customers to solve in the process of using the machine fault, to ensure that the customer is the production of precision is not affected.
2: woodworking engraving machine carved at the origin.
:
1, the file size is match with the machine.
2, check whether has offset ( 抵消) , layout Settings are correct.
3: woodworking engraving machine startup reset abnormal noise or always bad limit switch
:
1, the top limit switch, its calibration.
2, drive line contact is bad, drive line can be fixed.
3, limit switch line not connected, the line can be connected.
4, limit switch is damaged, change of the can.
4: woodworking engraving machine set origin sometimes forward migration or right to offset and offset distance.
:
1, limit switch failure, in the process of system back to the origin of the limit switch is closed and bounce off. Change the limit switch.
2, drive wire is loose. Managed to get it fixed tightly.
a: woodworking engraving machine work spindle motor in the process of sudden halt or slow.
:
1, the working voltage instability or super load, add a voltage regulator.
2, check whether the median line is connected and the thread if there were any desoldering.
engraving machine adopts advanced assembly process automation, every factory of the machine after 72 hours of high strength quality inspection and testing, to ensure the machine zero fault, at the same time, professional and timely after-sales service team is also the first time to help customers to solve in the process of using the machine fault, to ensure that the customer is the production of precision is not affected.
2: woodworking engraving machine carved at the origin.
:
1, the file size is match with the machine.
2, check whether has offset ( 抵消) , layout Settings are correct.
3: woodworking engraving machine startup reset abnormal noise or always bad limit switch
:
1, the top limit switch, its calibration.
2, drive line contact is bad, drive line can be fixed.
3, limit switch line not connected, the line can be connected.
4, limit switch is damaged, change of the can.
4: woodworking engraving machine set origin sometimes forward migration or right to offset and offset distance.
:
1, limit switch failure, in the process of system back to the origin of the limit switch is closed and bounce off. Change the limit switch.
2, drive wire is loose. Managed to get it fixed tightly.
Custom message
