Woodworking CNC engraving machine common questions and treatment methods
Common problems and treatment methods in woodworking CNC engraving machine: one cannot be at the origin, woodworking CNC engraving machine engraving processing method: 1, the file size is with the machine match;
2, check whether has offset, layout Settings are correct.
2, woodworking CNC engraving machine start reset when abnormal noise or bad limit switch is always the top 1, top limit switch, it is positive;
2, drive line contact is bad, drive line can be fixed;
3, limit switch line not connected, the line can be connected;
4, limit switch is damaged, change of the can.
Three, woodworking CNC engraving machine work spindle motor in the process of sudden halt or slow turn 1, the working voltage instability or super load, add a voltage stabilizer;
2, check whether the median line is connected and the thread if there were any desoldering.
Four, woodworking CNC engraving machine set origin sometimes forward migration or right to offset and variable offset distance 1, limit switch failure, in the process of system back to the origin of the limit switch is closed and bounce off.
Change the limit switch;
2, drive wire is loose.
Managed to get it fixed tightly.