With the analysis of the causes of the sawtooth laser cutting machine processing

Laser cutting machine machining is choppy, was not a very big problem, when operating at ordinary times should pay attention to the following points can be; 1. Whether cutting machine too fast, which leads to the cutting is not neat, may consider appropriate to reduce speed. 2. Whether the output graphics is the BMP format, resolution is too low. 3. To determine whether the laser cutting head and beam synchronous belt too tight or too loose, the appropriate adjust tightness. 4. Check whether X axial tension wheel, have long work wear condition. 5. Metal laser cutting machine downtime state, confirmed that the car if there is a gap between head and slide block. 6. Check the status of laser reflective mirror slice have broken or loose, special attention should be paid to laser cutting head side mirror slice and focus lens is installed firmly. 7. Check measure whether the bearing and bearing wheel wear condition.