What stone carving machine is the necessary maintenance and maintenance

Now whether do stone, the tombstone or some other stone railings, stone ornaments, stone carving machine has to be some equipment, is no longer rely on manual sculpture, so what's the necessary machines in use process preventive maintenance and need to be aware of? Double independent head stone carving machine 1, to ensure that the stone carving machine continuous running time within 10 hours a day, make sure the cooling water clean and the normal work of the circulating water pump, never allow water-cooled spindle water loss, to regular replacement of cooling water, in case of the cooling water temperature is too high, spindle motor burn out. Pump 2, stone carving machine after use to clean up in time. Machines in use process will produce a lot of dust, too much dust, has a great influence on the life of stone carving machine. So must will work in every time after the completion of machine mesa and side rails, rack and screw clean up the dust on the, of the drive system on a regular basis ( X。 Y. Three axis Z) Add lubricating oil. 3, the machine when not in use for a long time, should be done once a week for maintenance and oil filled empty machine go running, to ensure the flexibility of the transmission system. Tombstone BeiTou carved four distribution box, regular cleaning dust, check whether there is a screw loose terminals, to ensure safe and reliable circuit is used, please pay attention to the power off in advance before opening the distribution box to ensure the personal safety of operators. Stone carving up 5, when stone carving machine must cut off power supply after use, do not power on standby, so as not to reduce the service life of the machine. 6, cutting tool selection problem: the main material is stone carving machine tool, as the saying goes: a good horse matchs good saddle, appropriate selection of the cutting tool is especially important, poor long-term use sharpness or bending different heart of manual cutting tool can cause great influence to spindle motor and the bearing, speed spindle motor bearing damage rate. Stone carving knife, factory will regular cooling water pump, the control system backup, the cutter holder and cutting tool design, so as not to affect the normal processing of machine use.