What is the cause of the weak laser output

We all know that laser engraving machine maintenance and maintenance is very important, if but no matter how maintenance work is done again good, also is the inevitable will appear some problems, such as laser engraving machine laser output is very weak or not. If the weak laser carving machine laser output will lead to laser engraving machine doesn't work properly. Front for how to solve the problem of weak laser engraving machine laser output have had certain understanding, but we have to know where the problem is, can better solve these problems.

first, should inspect the power of the laser engraving machine is switched on, only in this way can ensure the laser output is normal.

in the second place, if there is a problem of weak laser output, will check to see whether because of a laser diode aging or is damaged, appear this kind of problem should be to replace the laser tube.

third, appear this kind of problem is probably because the laser power supply was damaged, when necessary, can consider to change the laser power supply.

4, there is another possibility is the overall temperature of the laser engraving machine is too high, appear this kind of circumstance can adopt three methods. The first is to turn it off, let down the temperature of the machine. The work of the second is to strengthen the ventilation, the high speed of radiator. The third is to adjust the overall environment temperature.