What are ABS double color boards carving details need to pay attention to what equipment should be used

Common material is ABS double color plate, which is known to all, with the development of the carving process, also more and more widely applied in ABS double color plate. And as the rapid development of optoelectronic technology, engraving technology has got more and more wide application range, carving precision demand is higher and higher. May many friends for ABS double color boards carving craft is interested in, we also come to detailed introduce for everybody:



ABS double color boards carving inspection standard



1, the surface has scratches, spots for defective goods.



2, comparative color, with the arrival of the batch number plate with color difference is as small as possible, the difference is too big can't use.



3, tore a few color for rub off the protective film, peel, cannot be used with protective film to rub off.



4, the overall protective film is consistent, whether the panel, membrane wrinkling and off membrane for defective goods, no protective film on the surface of the metal surface and the general should not be used.



ABS double color boards carving element



4 main factor affecting the ABS double color boards carving are: engraving speed, laser power, precision, material. On specific materials such as to achieve certain carving effect, requires that absorb energy, this energy carved speed should be as a material to absorb energy. Simply speak is to improve the material to absorb energy, should increase the laser power or reduce the speed of the sculpture, as for the final use which method have to see the materials to the final engraving effect.



in general users will avoid high and low speed, because it will reduce the production efficiency. Actually influence the efficiency of the sculpture is not only the speed carving, carving also has very big influence on its precision.



the above is that we introduce something about the content of the ABS double color boards carving craft, hope to be of service. ABS double color boards carving appears to be a very humble work, but if the engraving process was not well done, it is hard to make our ideal of ABS double color plate products.



to ensure engraving effect and maintain efficiency we recommend HZZ - endeavour V4000( Ilaser4000)