Stone carving machine stone renovation method

stone carving machine customer often because stone, improper for a long time, save by stone material surface stolen goods, wear, impact engraving effect. So how are these 'old' stone renovation?
marble, granite surface fouling, wear, scratch off color, can be refurbished. Renovation need to adopt professional renovation grinding equipment. Renovation should be selected according to stone varieties also too lidan or granite special grinding disc and polishing powder, and strictly according to the grinding disc orders, the order number from the waste to the fine grinding by long, can achieve ideal polishing effect, achieve the ground face-lifting maintains.

a, coarse grinding, leveling

coarse grinding ( Grinding) Using stone grinding machine with diamond millstone; Ling magnesia, resin stone ( Mesh, mesh) Or stone renovation ( Mesh, mesh) Will stone formed due to reasons such as deformation, shop, processing snip, rugged, and in the process of construction of scratches and other grinding leveling, remove the weathering of stone material surface and pollution at the same time.

2, fine grinding

fine grinding is using stone grinding machine with mesh, mesh, mesh diamond millstone, ling magnesia, resin stone or with mesh, mesh, mesh stone renovation of coarse grinding, Grinding) The surface of stone material, after grinding, in order to eliminate coarse grinding ( Grinding) Leave scratches, further adjust the grinding surface roughness, and for the follow-up of fine grinding and polishing to lay a good foundation. So the purpose of fine grinding is to remove the scratch.

3, check and repair for stone processing

in the coarse slow flat after a check repair, repair is to use resin or stone marble glue, the stone panel holes crack, collapse edge drop horn a little out of it. The purpose of repair is to repair the damage. After fine grinding, to be repaired again, use resin or stone marble glue, the grinding part after fracture aperture, sealing agent is not full or fall out area of secondary added, the gap and collapse edge drop horn to level off, the full effect.

4, fine grinding and polishing

fine grinding and polishing is with mesh, mesh resin polished stone and resin stone after a polishing mesh EX, LG or mesh, mesh, mesh water on the ground to carry on the fine grinding and polishing. High gloss improve after fine grinding, the surface of the marble stone density increased, its gloss degree can be obtained, general the purpose is to cast light, polishing.

5, the recrystallization of stone material surface hardening treatment

stone recrystallization hardening treatment concept will stone crystal flour special materials under the action of mechanical with the help of the friction produced when heat, combined with stone material surface structure and organization and rheological response, to produce more hard and bright texture blending crystallization layer, in order to improve the stone material hardness and wear resistance.

　　. With all-around cleaner, of red wool pad compared with equipment clean.

　　. With water will cut stone crystal powder according to tune into a paste, the polishing pad in red. Directly on the stone grinding, make reacts calcification stone material surface, so as to achieve stone material recovery if brightness is new.