Stone carving machine solve the problem of cutting knife

stone carving machine has particularity, often appear in the process of carving a problem is the cutting knife phenomenon, the main reason is the stone material, after all, it is hard, if the cooling water supply or not in time in the process of carving processing speed too fast, spindle speed too slow will affect the cutting tools and materials.
how to solve the problem of stone engraving machine cutting knife? If the tool after the break, the operator should immediately stop machine, and then look at the current processing line number and the detailed record. Carefully check the cutting knife point for cutting knife blade, if you have removed. Is important to analyze the cutting knife ( Stone mall) The main reason and avoid it again next time. And then replace the tool, after changing the tool should be noted that define the origin, the stone carving machine back to origin of the workpiece after the position of the two axis X/Y is correct, but the Z axis need to be sure, it's mainly to operate according to have to do the style of the graphics definition.
the main reason for the stone engraving machine cutting knife is processed into to fast or speed is not enough, the cutting tool quality is bad, turning processing is too big, tool clamping length is insufficient or shaking. , of course, and processing of stone, the stone material of different hardness is different, adjust the speed of the machine to the right in the processing, adjust slowly, over a period of time, and then select good quality knives, when buying machine, also should choose those stone carving machine temperature control.