Multistep woodworking engraving machine spindle motor abnormal sound?

multistep woodworking engraving machine spindle motor in the normal use of abnormal noise when running. The generation of this kind of noise, the main shaft bearing quality problems or spindle bearing service life has been to, or lower quality or damage after wear, can consider to change at this time. Multistep woodworking engraving machine with axial abnormal noise when walking. This kind of phenomenon exists in the X axis. More for axial motor bearing damage or X axial guideway lack of lubricating oil, too dirty, too close, ball wear, ball drop, etc. , should be timely treatment.
laser used in cutting or marking industry obvious advantage good effect, high speed, stable performance, long service life, etc. As a substitute for continuous wave type cutter, pulse fiber laser can be applied to more general evaporative cutting process, the monitoring device control laser through cutting line back and forth, each time only a tiny metal removal, and does not require the nozzle and auxiliary gas.
if replace walking after the spindle is not normal, can show that the shaft of the driving piece has been damaged, need to replace a good driver. If the spindle still won't do is replace the cable or motor cable or motor has some problem. Three axis are not move. At this time have check the three-axis air plug and control box connection is good, power control box is opened. Whether the data line and control box and control card connected to the PC host. If the above normal, please and contact us.