Engraving machine why want to use the original dimension of macro system - - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

is known as the copyright problem in the first place, piracy dimension of macro system regardless of performance, always is piracy, it is a kind of tort, the second is pirated dimensional macro system performance is not stable, after-sales service, etc, are unable to guarantee, this is one of, for many manufacturers, perhaps on reducing the costs of piracy system in you use some, but for piracy system will affect your product's production efficiency, the machine working performance, which virtually increased the cost of you, will eventually affect the normal development, it is recommended that the choose and buy engraving machine must use the original dimension of macro system.






let's specific see the difference between the original and piracy.





the macro control system consists of a set of dimensions of macro control card and the macro software, has the original macro control card and cracked versions dimensions macro control card. Cracked version d macro card is Shanghai Weihong Electronic Technology Co. , Ltd. , early experiment with the product performance is not perfect, and unstable. D macro officials give performance of the original and piracy.





1, the original system to control the pulse frequency is higher, faster, The highest output frequency of 1 MHZ) , better control pulse quality, control of high resolution, effectively improve the machining accuracy, stability and degree of finish, pinguan CNC original security identification, reduces the machine tool, the noise and improve the service life of machine tool. These aspects of pirated d macros cannot do, pirated output frequency is only 50 KHZ.





2, the original system adopts differential output control signal, the interference effectively, the system stability is better. Piracy d macro output signal is single polar, anti-interference ability is poor.





3, the original dimensional macro system through a complete set of EMC test, test process, strict quality is reliable. No test system of piracy.





4, the original system provides for wiring terminal board, can support servo drives, servo connecting cable, and provide convenient production and maintenance. Piracy d macro is not terminal board, wiring complex and unstable.





5, the original system adopts advanced LEP interpolation algorithm, good machining quality, high degree of finish. Piracy system does not support the latest algorithm.





6, the original system does not need to many format file conversion, can be used directly.





7, the original system software has the function of the software package and the parameters of the automatic backup, support backlash compensation, pitch error compensation, quadrant compensation, tool compensation, analog adjusting the spindle speed, spindle automatic alarm, automatic knife, points, the handwheel function, in one period of implementation, support drilling tapping, timing, automatic oil supply function, breakpoint continue, coordinate management mode, more servo alarm, servo enabled, servo encoder signal feedback, the advantages of the external rate switch, knife library functions. The above function piracy system does not have.





8, the original macro control system provide 7 * 24 hours service, set up offices in 15, the service is convenient, easy to solve the problem in a timely manner.





9, the original system can give the encryption.





10, the original system can support for accurate power function, not misplaced.





in the last attached macro legal system in suzhou:





d macro electronics technology co. , LTD. (Shanghai Hereinafter referred to as the Shanghai d macros) Hereby solemnly declare:





Shanghai macro numerical control software system, department of Shanghai d macro independent research and development products, independently enjoys all related intellectual property rights, are protected by the laws of the People's Republic of China, any production, modification, duplication, selling products of Shanghai d macro numerical control system is infringement, and may constitute a violation of intellectual property crime. Any illegal use of Shanghai d macro numerical control system products and profit of the infringement of the legitimate interests of Shanghai d macros.


Shanghai d macros for any violations of the intellectual property of the company shall retain its action for the power of the criminal, administrative and civil legal responsibility.





using pirated Shanghai d macro numerical control software may be on the user's machine tool equipment, computers and other electronic equipment adversely affected, resulting in damage, Shanghai d macros are not any economic law responsibility.





in order to protect your equipment safety, Shanghai d macro calls for the broad masses of manufacturers and users to use the original nc software control system.





we reserve to the pirated producers, sellers, buyers, the user shall be investigated for criminal, administrative and civil legal responsibility of power.





piracy system loss to bring any benefits to customers, Shanghai is not responsible for the d macros.





resolutely resist, the production and use of all kinds of piracy d macro card.





piracy to help users with genuine transformation, and provide the necessary technical support and training.