Engraving machine how to change a guide rail, round and square guide what are the advantages and disadvantages of - - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine engraving

in guide friendship remind:





1, and if they do not have strong hands-on ability, or find a mechanic to install it.


2, assembly should strictly abide by the precision of the first mode. Change the slider does not influence the use of the machine precision, this requires the machine to replace parts, more careful, strictly abide by the manufacturers technical guidance. Measuring Angle more cannot careless carelessness.


3, two side rail slider should follow the principle of the original agreement. No matter what, make sure the two slide rail with unified matching patterns. If there is error, then carving machine will appear in the process of carved stone clearance, frequent cause malfunction.





engraving confidential notice to maintain:





from some more in the winter season, from the use density board engraving machine industry generally do it some more. The causes of this phenomenon is the daily maintenance work was not well done, especially for high working frequency, the bad environment.





it is need to strengthen the engraving machine track maintenance work, generally speaking, a week to half a month time to do a comprehensive slider to clean, no viscosity should be used when cleaning of diesel or gasoline can be avoid by all means not to use bigger oil viscosity, in winter it is easier to cause the slider sudden death, is clean and then add some lubricant is ok, I hope you pay more attention to these in the practical use, in order to avoid unnecessary trouble for yourself.





engraving machine round and square guide:





there are two types of linear guide, circular guide and rectangular guide. The specific performance is not detailed and reliable data can be compared. Because of the rail price is much higher than that of circle, all people think that rail is superior to the circle. The main parameters of linear guide is precision, and the coefficient of friction. In the context of the processing method of both circular processing cost far less than square linear rail track. For the side rail, domestic products and imported products with a certain distance. From the experience value side rail is higher than the life of a circle. But the concrete numerical nobody to do theoretical research is bad. Just enough, you'll use circle, excellence regardless of price, with high precision square rail.






engraving machine the advantages and disadvantages of round and square guide:





engraving machine circular guide is cylindrical linear guide rail, where the support is limited, so the poor rigidity. Bearing capacity, high accuracy, due to the circular guide relatively low cost, short production cycle, easy to install, on many occasions as an alternative to the square linear guide.





square square linear guide rail points and the square hard track, speed fast on the accuracy is better than a linear guide rail, but in terms of rigid hardened rail is dominant, see which aspects do you use in machine tool equipment, according to the different structure of machine tool equipment use, used rail style also is not the same.





product features; High positioning accuracy, good reproducibility; Linear guide way of rolling motion, small friction coefficient, particularly the gap between the static friction force and friction force is small, even if there will be no idle when trace feed skid phenomenon, analytical ability and the best reproducibility, thus can realize mu m class location accuracy. Low frictional resistance, but for a long time to maintain accuracy;





linear guide rolling friction can be reduced to slide guide rail frictional resistance of 1/20 ~ 1/40, especially for lubrication of simple structure, lubrication easy, good lubrication effect, the most bottom friction wear of contact surface.





so you can walk for a long time to maintain accuracy. Can carry high load capacity in four direction; Geometric mechanics structure optimum design, can bear radial load, the radial and transverse direction, and keep the accuracy, at the same time can easily borrow by the number of in preloading and the slider, can improve the performance and load capacity.





is suitable for the application of high speed; The characteristics of small friction resistance, low drive power demand for equipment, energy saving effect, especially sports wear small, low temperature rise effect, at the same time realize mechanical miniaturization and high demand.





rail engraving machine price, of course, more than double engraving machine, mainly to see your own economic strength in the industry, double function of carving up to the job, there would be no need to spend more money to the buyer's rail engraving machine. Don't think later expanded scale machine don't share it, you are big, will certainly buy more better engraving machine, engraving machine industry is also upgrading soon now, suits own is the best.