Engraving machine engraving machine axis how to connect, what role - and the axis of rotation - 【 】 Engraving machine _ _ _ _ CNC engraving machine woodworking engraving machine carved

engraving machine axis how to connect the





line into the X or Y axis of rotation of the motor shaft drive, can use the above before use to modify the axis of rotation of motor parameters. Parameters do not change the words to make to the size of the deformation.





engraving machine with the function of the axis of rotation





1, the carving machine without calculating the rotary carving path developed surface;


2, don't have to repeatedly rotating workpiece; A complete tool path calculation.


3, reduce the finish machining allowance; Cutting tool path can be layered rough machining.


4, local rotation is processing; Can be set Angle range and length range.


5, the influence of the fixture accuracy, irregular rotation of the workpiece machining usually adopts faceted rotating positioning. There is always a seam between different processing direction.


6 axis of rotation, no positioning seam carving processing adopts rotor integral method, carving machine generated automatically closed rotary carving machining path





engraving machine lift platform of rotation characteristics





1, engraving machine body and frame is with thick wall tube welding, and eliminating stress processing, good rigidity, the deformation.


2, Y axis adopt double motor drive, high precision gear and rack driving, power is larger, smooth operation.


3, lift platform USES is 2 kw three-phase asynchronous motor, turbine worm gearbox, sprocket drive small spacing and four large diameter trapezoidal screw, and add buy four large diameter guide light bars are lifting up and down movement, stable and reliable, the maximum lifting weight can reach 1. 5 tons.


4, the rotating machine chuck ( Positive and negative) And telephoned the thimble. Plunger movement back with square linear guide, concentricity is very accurate. The chassis is the ZL - 102 the overall casting finishing. Biggest machined part is 400 mm in diameter, length is 1200 mm, the work piece can be up to 56 kg weight, and balance wheel configuration artifacts.


5, optional stainless steel water trough in the lift platform, for processing stone material to use, and the automatic feed water device.


6, on equipment platform, two type 4012 rotator can be placed in cylindrical workpieces, rotator can be discharged, for plane engraving, flat workpiece thickness is 700 mm.





common method of carving machining axis





1. Put platform directly, so the longmen need higher, for plane engraving size does not affect the platform. The axis of rotation can be placed at any time, take it down.


2. Put the platform side, the diameters of the axis of rotation effect of longmen is higher, if the large diameter extensions to longmen, if there is no need for the 10 centimeters in diameter, but the axis of rotation to put side carving size affect platform, sometimes need to widen the gantry.


3. Overall sinking mesa sink, mesa, put the rotation axis under the platform, platform carving plane words carved in put on the axis of rotation.