Correct use of advertising engraving machine to avoid these taboos

No matter what kind of equipment we use, it is best to know some related taboos in advance, so as not to cause serious accidents in the process of use, if it is difficult to recover, everyone must not want this kind of thing to happen. So how to use the advertising engraving machine is correct? You can take a look at the following taboos: in the process of using the advertising engraving machine, we need to use it correctly. Today, we introduce some taboos of using the advertising engraving machine: First point: it is strictly prohibited to use a power supply that does not meet the rated voltage. The second point: most of the advertising engraving machines are made of metal, so we must not place the advertising engraving machines in a humid environment, which is very corrosive to the advertising engraving machines. The third point: if there is odor or noise and smoke in the process of using the advertising engraving machine, it is necessary to immediately stop using the advertising engraving machine and conduct a detailed inspection of the advertising engraving machine. The fourth point: it is strictly prohibited to install and debug the advertising engraving machine in thunder or rainy weather. The fifth point: it is strictly forbidden to replace or destroy the original accessories and cables of the advertising engraving machine when using the advertising engraving machine. Original accessories are configured according to the corresponding advertising engraving machine needs, if the replacement, there may be unnecessary damage or accidents. The above content is compiled for everyone about some taboos that must be avoided in the process of using the advertising engraving machine.