Computer engraving machine upgrade and maintenance guide

by:Transon     2020-04-25
Don't think that I would have to buy a engraving machine can do all the work, the carving machine is divided into various types, in order to deal with a variety of different processing tasks. Level, for example, you have to buy a mold engraving machine to carve double color boards, or buy a large engraving machine carving seals, cause huge waste of all this, and they could not get good effect. You have to buy a same level advertising engraving machine to do the mold, may be cannot do. So before the upgrade, you must to the sales staff fully show their own content of work to do, including the size of the machining, material is qualitative, the thickness of the material, weight, finally carving effect and requirements, and so on. A small advertising signs, choose a suitable model shop to first-time buyers, the main production of solid lamp, crystal words, double color boards, badges and other purposes, should choose and buy advertising level. In general, the carving machine width is greater than 1200 mm above, are not fit to double color boards, fine carving of live, and is suitable for saw words, do some large flat. Wide in 1200 mm and below belongs to the universal engraving machine, can be used as a double color boards, slowly, and saw the word can be used to do menial jobs. For machined cylindrical or other alien artifacts, because of the need to add some tooling or rotation axis, it will be shown in the Z axis high pillar, mesa to segment between the space is large, so can choose special machine. If it is chop shops carved seal can match LE2520 or first LE5032 engraving machine. Jade carving LE2520 machine is best. Second, understand various manufacturers of engraving machine machine its internal structure are basically similar, but the quality of the machine is differ in thousands ways. At this time requires that you have a pair of 'critical', see clearly the stand or fall of engraving machine materials, the advantages and disadvantages of parts used. Didn't know this but most of the customers, even the scene to see the machine could not distinguish, this requires you to sales personnel details about carving machine spindle power, the power of the motor, drive is to use homemade drive plate or the driver of the stable quality. Three, signed a contract after the decision to buy, the first thing you do is to sign a contract with vendor, the contract should indicate the type of the purchase, configuration, price, delivery time and delivery methods, training methods, warranty terms, and payment terms and other elements. After the contract signing, usually should pay a certain amount of the deposit as stipulated in the contract ( Have the spot except) 。 Four, after the arrival of the goods delivery and training engraving machine, usually by technical personnel door-to-door out testing machine, after the electricity, carefully check whether the appearance is damaged, whether to suffer damage in transport. Such as intact, do not contract with random manual counting machine configuration with accessories. By technical personnel for machine installation, Including the hardware installation, demolition of fixed pieces, place the machine. In a variety of cable connection power. Software installation, configuration, installation of choose and buy computer engraving software) 。 Installed, based on the testing image file provided by the manufacturer tested carving machines, such as carving test correctly, after acceptance of delivery.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...