CNC engraving machine maintenance of common sense

by:Transon     2020-04-24
CNC engraving machine maintenance of common sense: as a precision CNC CNC engraving machine maintenance and maintenance is necessary, can improve the efficiency of CNC engraving machine work. A. CNC engraving machine screw, light bars of maintenance: each machine after use, should pay attention to clean up, be sure to clean up the dust on the platform and the transmission system, on a regular basis ( A week) The drive system ( Three axis X, Y, Z) Lubricating oil. ( Note: X, Y, Z three axis polished rod with oil for maintenance; Add the butter screw rod part; If working environment temperature is too low in winter screw, polished rod ( Square guide or circular guide) Part should use gasoline to wash clean first, then add oil, otherwise it will cause machine transmission part of the resistance is too large and cause dislocation machine. ) 2. Circulating cooling water replacement: continuous running time under 10 hours a day, ensure the normal work of the cooling water clean and the water pump, must not water shortage phenomenon in a spindle motor, regular replacement of cooling water, in order to prevent the water temperature is too high. If working environment temperature is too low in winter can replace the water inside cistern with antifreeze. 3. CNC engraving machine electrical maintenance: maintenance checks to the appliance, must cut off power supply, to monitor display and main circuit power light goes out after may.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...