CNC engraving and milling machine to introduce knife step process
by:Transon2020-04-23
CNC engraving and milling machine for knife steps are as follows: (1) open the machine and system according to the order for back to the machine zero point operation.
In 'the F4 return way', then run 'F6' key, bed each will return to the origin of the machine tool coordinate system.
(2) to be processed blank firmly clamped on the machine work bench (
Blank size and the same size in processing module)
。
(3) pick up 'F2 handwheel way', 'the handwheel to open the' sub menu by pressing, careful operation hand wheel, cutter will be moved to the workpiece origin.
Again the submenu 'six coordinate parameters' press, fill in G54 coordinate system artificial origin coordinate values, preserve.
(4) manual input, G54 ~ G59 method: open system, first back to the origin of the machine tool;
Find the workpiece origin (
The knife)
;
The corresponding CNC engraving and milling machine coordinate values input to save the coordinate parameters dialog box;
Coordinate system used program header must be correspond to the preservation of the workpiece coordinate system.
Above CNC engraving and milling machine is an introduction to the process of the knife.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist