CNC carving and milling machine design method

The conventional 3 d mechanical and electrical structural products machine ( Hereinafter referred to as 3 - D) Design method, usually starts from the parts design for product assembly design. It is in the overall design requirements from the product under the status of individual parts of a 3 - D design and the product layout design, and use a relatively simple means and methods to determine whether meet the design requirements and design criteria. Then the designer to assemble parts for the final product check. Its defect is the product developed by not only the lack of inheritance of the whole machine design standards and design requirements, and in the design stage of the product of some important parts information, product design information has not been well established and control, often at the end of the detailed design in the early years of design and checking the stage can find some problems, therefore, designers need to spend a lot of time to 3 - to the product D model modification and reconstruction.
CNC engraving machine co. , LTD USES the Pro/E TOPDOWN technology for the design of the machine. 前 Down design method is in the product the machine's initial design phase, system structure is defined in the product to the highest level to consider the overall design of the product and functional design. This method starts from the product form the top, the component parts of the machine parts as a system to consider, and according to the products in the mutual position, role and function of realization, establish product consisting of 2 d ( 2 d) Layout and 3 d skeleton graphics. Through a given design constraints, the key design parameters, such as design information, centrally capture machine product design intent, top down to pass by to spread the whole design process of product design information.
engraving machine price information in the numerical control network.