Carving machine to do - when the power is cut off - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

carving machining interrupt to do





engraving machine generally with the knife block, but when in the process of machining, the accident when the power is not necessarily can find the original origin. Captures a lot of time in order to save trouble, we typically do not back to the mechanical origin.





if processing power appeared in the process of carving, if the machine is to break electricity, computer after the break, the moment the computer or data transfer, but the machine has been stopped, turned on after the restart will lead to can not find the origin, so if a processing capacity is too large or repeated change knife is best marked gently on the material under the condition of the origin, so the above condition can be easily solved.





how continue engraving machine carved after blackout





senior start is ok, have a look at the power failure on number, fill in the senior start with just a little a bit forward line number, was determined, the machine will in the line number started carving. However, if you are very fine carving, carving line from scratch, and only to a few silk, if continued carving will see continued carving seam, you try to know.





if it is a normal shutdown, the system will be the current position and the serial number to write down the machine, but suddenly loses power, the system can not afford time to save the current position, the serial number is also about before the breakpoint continued to go, but have to find the origin.





if you have any questions on the current serial number in the heart, the most stupid way is to delete the original file have carved part to output, and it is also not much, but must not delete the lower left corner, because it is the origin.





engraving machine fission keyboard control: simple, convenient, easy to learn the fission of the keyboard operation, users can quickly mastering the use of the equipment, the stronger independence.