500 w fiber laser cutting machine, its main design concept is as follows

500 w fiber laser cutting machine, its main design concept is as follows: first of all, is to use fiber laser instead of CO2 laser and light pumped laser. And compared with the traditional laser, this has better cutting quality, lower system cost, longer service life and lower maintenance cost, lower power consumption. Laser and fiber laser can be through the optical fiber transmission, convenient connection with motion platform, realize flexible manufacturing, greatly simplifies the system design of traditional laser cutting machine, and also improve the stability of the system, reduced the amount of maintenance, really suitable for application in the field of industrial processes. Secondly, based on the characteristics of the sheet metal industry, most of the artifacts for thickness in 1 - Within 5 mm sheet, equipped with 500 watts of fiber laser, cutting speed of 2 mm carbon steel plate can be up to 5-6 meters per minute, and already 2000 w CO2 laser cutting system of the actual processing speed, and laser system cost is greatly reduced. Fuselage would be more suitable for human body engineering design, convenient operation. According to the analysis of equipment running cost 500 w fiber laser cutting machine, electric conversion rate was 30%, and the system power consumption is much lower than 2000 wco2 laser cutting machine. Save the running cost. 500 w fiber laser cutting machine at present, many customers have reflected the device of cutting speed, stable operation, has a great advantage in cutting thin plate.