Jinan Transon CNC Equipment Co., Ltd.
S I N C E 2 0 1 0
Latest products
by：Transon
2021-01-08
A look at sealed can let us tear easily cone package contains a subtle laser science and technology.
China's carbon dioxide laser marking laser equipment factory function realization of high-speed packaging punch line drawing, make our life more convenient.
A product excellent packaging are passes stylist elaborate design in building, such as food packaging, not only appearance elegant design, prevent food from any pollution, achieve the result of keeping fresh food, but also facilitate consumers to use.
In order to achieve & other;
Easy to eat & throughout;
Purpose, food packaging manufacturers are generally used in food packaging on the holes or line drawing, making it easier to be used.
Below we will with cone packaging manufacturer of co2 laser marking machine is used for example about the problem.
in this particular application, fill the ice cream cone cone are wrapped in a material, this material by 70 - 80 microns thick paper, paper side coated with a layer of about 20 microns thick aluminum film. In order to open this kind of packing, manufacturer perforate paper at the same time keep aluminum layer has not been touched the completely. Keep aluminum layer is required, it can maintain the mechanical stability of the packaging, at the same time avoid endanger the isolation of moisture and oxygen packaging function.
when a big dessert packaging manufacturer first development punching process, clearly explain any new method should cater to several important standards. First of all, the punching process must be able to integrate with existing production line, in the existing production lines, packaging is through the conveyor belt through the transmission of the rate of 3 per second. Second, the punching process should only very few will be added to the product unit cost. Finally, the new process cannot make paper discoloration or cause obvious debris, because it can make consumers to food produce negative feelings.
the packaging vendor immediately understand that no one can meet all the existing mechanical method of these limitations. In particular, is not a traditional paper cutting tool in high speed conveyor belt able to complete the operation of the level of precision. So the company turned to laser system development products & ndash; — Laser cleaning system, to seek the solution.
by laser cleaning system development of packaging punching system will be a carbon dioxide laser marking machine and focusing optics and two-dimensional galvanometer scanning system closely together. In the process chain, paper is flat triangles. Co2 laser marking machine to draw a smooth curve, at the same time at the end of each line with two additional & other; Auxiliary line throughout the &; （ To assist in precision began to tear at the right point mouth) 。 The wound into the final of the paper cone tubular with glue, this kind of punch forming curve becomes a straight line.
the speed of conveyor belt is about 1 m/SEC and remain unchanged, the scanner will compensate the movement, and in the product moves to cut. Since the laser power is fixed ( Only laser duty ratio is variable, the peak power is a constant) , so the effect of scanning speed is the only variable. If cut is too deep or too shallow, you can change the scanning speed to optimize the process.
related models: MC30 - B - A line of co2 laser jet. the
MC30 - B - A is A special small co2 laser marking machine, pharmaceutical packaging in plastic, leather, wood and other nonmetallic material on marking, printing, the equipment can work with rotating platform, rotating disk fixture and other functions for the general customers matching, can meet different application requirements; The small laser printing machine also adopts the special flight marking control system, can be equipped with assembly lines, realizing fast laser marking line and good performance, easy operation.
laser equipment factory professional laser equipment manufacturer in China, the product has the uv laser marking machine, CO2 laser marking machine, laser engraving machine and so on.
in this particular application, fill the ice cream cone cone are wrapped in a material, this material by 70 - 80 microns thick paper, paper side coated with a layer of about 20 microns thick aluminum film. In order to open this kind of packing, manufacturer perforate paper at the same time keep aluminum layer has not been touched the completely. Keep aluminum layer is required, it can maintain the mechanical stability of the packaging, at the same time avoid endanger the isolation of moisture and oxygen packaging function.
when a big dessert packaging manufacturer first development punching process, clearly explain any new method should cater to several important standards. First of all, the punching process must be able to integrate with existing production line, in the existing production lines, packaging is through the conveyor belt through the transmission of the rate of 3 per second. Second, the punching process should only very few will be added to the product unit cost. Finally, the new process cannot make paper discoloration or cause obvious debris, because it can make consumers to food produce negative feelings.
the packaging vendor immediately understand that no one can meet all the existing mechanical method of these limitations. In particular, is not a traditional paper cutting tool in high speed conveyor belt able to complete the operation of the level of precision. So the company turned to laser system development products & ndash; — Laser cleaning system, to seek the solution.
by laser cleaning system development of packaging punching system will be a carbon dioxide laser marking machine and focusing optics and two-dimensional galvanometer scanning system closely together. In the process chain, paper is flat triangles. Co2 laser marking machine to draw a smooth curve, at the same time at the end of each line with two additional & other; Auxiliary line throughout the &; （ To assist in precision began to tear at the right point mouth) 。 The wound into the final of the paper cone tubular with glue, this kind of punch forming curve becomes a straight line.
the speed of conveyor belt is about 1 m/SEC and remain unchanged, the scanner will compensate the movement, and in the product moves to cut. Since the laser power is fixed ( Only laser duty ratio is variable, the peak power is a constant) , so the effect of scanning speed is the only variable. If cut is too deep or too shallow, you can change the scanning speed to optimize the process.
related models: MC30 - B - A line of co2 laser jet. the
MC30 - B - A is A special small co2 laser marking machine, pharmaceutical packaging in plastic, leather, wood and other nonmetallic material on marking, printing, the equipment can work with rotating platform, rotating disk fixture and other functions for the general customers matching, can meet different application requirements; The small laser printing machine also adopts the special flight marking control system, can be equipped with assembly lines, realizing fast laser marking line and good performance, easy operation.
laser equipment factory professional laser equipment manufacturer in China, the product has the uv laser marking machine, CO2 laser marking machine, laser engraving machine and so on.
Custom message
