Woodworking CNC engraving machine use water-cooled spindle need to pay attention to what problem?

Use wood CNC carving machine users know the spindle motor is the core part of a woodworking engraving machine. And woodworking engraving machine spindle motor can be divided into the air-filled motor and water, as the name implies, wind cooling, air cooling is through the water-cooled motor is cooling through the water cycle. At work, in contrast, water-cooled motor noise is small, and to use than the air-filled motor price is economical, so using CNC woodworking engraving machine the customer is very much. So, using water-cooled motor woodworking engraving machine when use should pay attention to what problem? 1, for water-cooled woodworking engraving machine, some clients often forget in cooling water, especially in the summer, the effect of cooling water temperature too gao will not spindle, so for a long time will greatly reduce the service life of the spindle. 2, it was colder in winter, cooling water to ensure that the work is completed promptly clean up, be careful because frosty freezes water or tap water tank. 3, CNC woodworking engraving machine spindle motor cycle use of water, it is best to use pure water, otherwise easy to have occurred, pipe blockage water-cooled motor. 4, the influence of the temperature for the carving machine is not very big, but due to many clients to screw with butter, winter also forget to clean up, leading to a day for the first time boot operation does not open, some workshop temperature is very low, while the oil, can still frozen, the machine running. So winter is the best guarantee preparation temperature, using machines at room temperature, best staff at least will not very cold. Check the oil standard applicable temperature, at least minimum temperature. Machines need not when, if the indoor temperature is low, the best pour out the water in the tank, to prevent the frost crack water tank and the water pipe.