Water cooling machine and laser cutting machine laser does not use the matters needing attention for a long time

Water cooling machine and laser cutting machine laser does not use the matters needing attention for a long time: 1. According to the first method usually put out the water cooling machine inside the water tank of water; 2. As far as possible to pipe the water in the emptying the water-cooled machine. Removed from water cooling unit, the pipe using compressed gas respectively for ventilation, 4 in and out of the gate until the water-cooled machine pipe the water in the basic line come out so far, four in and out of the gate as shown in the figure below. 3. Insert two fast to ion drum pipe down, use compressed gas blowing from top to bottom, will go to the ion blow out the residual water in the bucket. Then insert quickly up and down pipes to collect ion barrels. Such basic guarantee to ion barrel won't because the ice and frost crack. 4. Will be in and out of the gate of the pipe down to laser end, use compressed gas respectively for ventilation, four out until the water in the water inside the laser on the basic. 5. After laser and water-cooled machine external other pipe the water in the pipe emissions clean.